Products Review

UTEPO Industrial PoE++ Switch for Solar Power

Time：2023-07-04 Source：UTEPO

UTEPO Industrial 8-Port Gigabit PoE+ 2-Port 1G/2.5G SFP L2 Managed Ethernet Switch (UTP7310S-PSD240-W) provides 8 10/100/1000Mbps PoE ports which can deliver up to 45W power per port. It can be set by software to deliver up to 90W power for port 1, disabled PoE function for port 2 at the same time, and deliver up to 45W power for ports 3 to 8 each.

Based on the wide voltage input range(12~57V), it can be charged by the natural source of energy, such as solar, wind and hydroelectric power to conserve energy to power remote IP devices. It can be widely used in PoE networking systems for forests, deserts, national parks, highways, etc.

● Outstanding 802.3bt PoE++ Solution for Industrial Environment

The switch provides 8*10/100/1000Mbps Ethernet RJ-45 ports, 2*1G/2.5Gbps SFP uplink ports. All downlink RJ-45 ports support Power-over-Ethernet (PoE), which can deliver up to 45W power per port. It can be set by software to deliver up to 90W power for port 1, disabled PoE function for port 2 at the same time, and deliver up to 45W power for ports 3 to 8 each. It meets IEEE 802.3af/at/bt standard.

● Support Wide Voltage Input Range (DC 12~57V)

UTP7310S-PSD240-W supports a wide DC voltage input range from 12V to 57V. It can be powered by solar energy directly with a solar panel during the day and powered by a battery during the night. And the operation of outdoor IP devices could be warrantied by the voltage booster function of the switch.

● Visual Monitoring

Support local visual monitoring, with MPPT controller, you can check battery capacity and other battery status, PoE power, total power, etc.

● Smart Battery Management

Support schedule for PoE and battery. You can enable/disable the PoE function of some ports during any specified time or when the battery power is low to save power.

● Convenient Auxiliary Interfaces

1*DC Output: Provide DC 12/24V output for IoT devices such as sensors. And the voltage value can be set by the DIP switch.

1*RS485: Support customization services to access various IoT devices or as a serial server. Provide Modbus: conversion and can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors.

1*USB 3.0: Support local update for software, avoiding device crash caused by power failure during web upgrade.

1*Relay: Support relay alarm for power failure, cable link down, and PoE link off.

● ONVIF & Smart Topology View

Support ONVIF services for effective recognition between video surveillance and other IP-based physical security products. That is to say, the switches could automatically recognize ONVIF-supported IP cameras, network video recorders (NVRs) and other IP devices like access control systems. Then, they form a virtual topology view in the WEB GUI through LLDP, from which users can learn information about the connected devices, including IP address, device type, device name, MAC address, etc.

● Smart PoE-based Technologies

Quick PoE: It enables PoE power supply immediately upon switch startup without waiting for switch system software control.

Perpetual PoE: It enables PoE power supply without interruption when switch is restarting and restores the network quickly.

PoE Watchdog: It detects PoE devices and reboot PoE devices automatically when a link failure or device malfunction is detected.

● One-key Smart Technologies

● Abundant L2 Management Function

It supports L2 management functions, such as 802.1Q VLAN, 802.1p QoS, SNMP, STP/RSTP/MSTP, Fast-Ring, ERPS, IGMP snooping, DMS (Dashboard management system), etc.

● Support Fast Ring

Support fast ring with self-healing time in 20ms. When the main link is broken, the backup link begins to work.

● Support eMMC Storage

Reserved design on the PCB for eMMC storage (Being added according to the demands / Max. 128G), which allows to record and store data, such as video, picture, etc.