UTEPO unmanaged fast Ethernet PoE++ switches provide 1 10/100Base-T 802.3bt PoE++ RJ45 port, 3 or 7 10/100Base-T 802.3at PoE+ RJ45 ports, 2 10/100Base-T or 10/100/1000Base-T RJ45 ports. The PoE port 1 of switches supports 90W max of PoE output power, and the rest PoE ports support 45W max of PoE output power.

The switches support three working modes (Default, VLAN, CCTV). In VLAN and CCTV mode, the product supports the PoE watchdog function. In CCTV mode, the data transmission distance can be extended to 250 meters, ensuring stable and smooth data transmission over long distances, fully satisfying the security monitoring networking needs of families, SMBs, Soho, etc.

● IEEE 802.3bt PoE++ Solution

UTP3106-PSD:1*10/100BASE-T PoE++ RJ-45 Port + 3*10/100BASE-T PoE+ RJ-45 Ports + 2*10/100BASE-T RJ-45 Ports

UTP3210-PSD:1*10/100BASE-T PoE++ RJ-45 Port + 7*10/100BASE-T PoE+ RJ-45 Ports + 2*10/100/1000BASE-T RJ-45 Ports

Complying with the IEEE 802.3af/at/bt PoE standard, the PoE port 1 of switches supports 90W max of PoE output power, and the rest PoE ports support 45W max of PoE output power.

● PoE Mode DIP Switch (Only UTP3210-PSD supports)

UTP3210-PSD PoE mode can be set by the DIP switch.

PoE Mode 1: 45W max for each port.

PoE Mode 2: 90W max for port 1, disabled PoE function for port 2, 45W max for ports 3~8 each.

● Support Three Working Modes

The switches support three working modes, changed by the DIP switch.

>> Default

All prots could be a able to communicate with each other.

>> VLAN

Downlink ports are isolated from each other, but can communicate with uplink ports. This mode supports PoE watchdog.

>> CCTV

The transmission distance is extended up to 250m, but the rate is limited to 10Mbps. This mode supports PoE watchdog.

● PoE Watchdog

Support PoE watchdog under VLAN & CCTV mode. The switches could continuously detect PoE devices and reboot PoE devices automatically when a link failure or device malfunction is detected.

● Excellent Performance of Protection and Anti-interference

Support 6kV surge protection to ensure the stable operation.

● Lightweight Metal Casing

The switches are protected by a sturdy lightweight metal casing to ensure a long product life and high-performance cooling capability.

● Plug and Play

All the Ethernet ports support MDI/MDIX. The switches are easy setup with no software installation or configuration needed.

● 1*FE PoE++

● 3*FE PoE+

● 2*FE

● IEEE 802.3af/at/bt

● PoE mode: 90W max for port 1, 45W max for port 2~4 each

● PoE budget: 120W

● 1*FE PoE++

● 7*FE PoE+

● 2*GE

● IEEE 802.3af/at/bt

● PoE mode 1: 45W max for each port

● PoE mode 2: 90W max for port 1, 45W max for port 3~8 each

● PoE budget: 150W