UTEPO 24V passive PoE switches support 6KV surge immunity and dial switch with which users can set the operating mode of the switches to ensure the safe use of the devices. Equipped with 24V to 12V PoE splitter, it can solve the complex deployment of non-poe camera, access control, bridge and other front-end equipment in the project and decrease the cost effectively.
>>DetailsThere is a high rate of damage to the monitoring device caused by lightning, and it may cause the loss of the monitoring video or lead to the breakdown of entire system. SF5/SF8 are designed for security industry, and provide 5/8*100M RJ45 ports, which support 6KV surge protection. And the switches also support 8KV ESD protection. With above function, it prevents switches from the video losses caused by indirect lightning.
>>DetailsWhen junction temperature (Tj) of the chips goes up every 10 ℃, the service life of the device would be reduced by half, and the failure rate would be increased by twice. Therefore, with these problems existed, the designers need to work out a solution to solve the thermal failure, and developers also have to figure out a solution to improve the cooling system.
>>DetailsThe unmanaged Ethernet switch provides 8*10/100Base-T RJ45 PoE ports (IEEE802.af/at) + 1*10/100/1000Base-T RJ45 + 1*1000Base-X SFP port. It supports one key CCTV mode: 1-8 downlink PoE ports can only communicate with uplink ports. The furthest transmission distance could reach 250m. PoE watchdog (detecting if the PoE device doesn't work, retart them). The product could be used in network security video surveillance, network project etc.
>>DetailsThe high-power fanless layer 3 PoE switch, which provides 24*10/100/1000Mbps RJ45 ports + 4*1/10G SFP+ slots. It supports fanless high-power PoE output(350W). It supports layer-2/3 network management. The products are widely used in security surveillance, network engineering projects, especially in low noise surround such as hotel, office, hospital.
>>Details+86-755-83898016-863
+86-1501-2669-765
info@utepo.net
Note: To speed up our service to you, please make sure the field with " * " mark is filled before you click on "Submit" button, Thank you!