The new-arrival UTEPO unmanaged PoE Switches provide 16/24 10/100/1000Base-T PoE+ ports with up to 30W PoE per port, and 2 1000Base-X SFP ports for a flexible extension. It eliminates the time and cost of deployment by integrating power and data switching into one unit and freeing network devices from restrictions of power outlet locations and the additional AC wiring. The switch also supports 4 working modes through the DIP switch (Default, QoS, VLAN, and CCTV), which provides more performance choices for different networking demands. It can be widely used in video security monitoring systems, network projects, etc.
● PoE Provides Centralized Power Management
Providing 16/24 10/100/1000Base-T PoE+ ports, the switches support a max 30W PoE power per port and supply power to IP camera, AP, etc., in a reliable, stable, and eco-friendly way. All the power would be sent from the back end (PoE switch). What you need to do is to add the UPS power next to your PoE switch. When the power is cut off, the UPS power will take over and continue to supply the power to the whole system.
● Flexible Extension with SFP Port
The series provides two Gigabit Uplink SFP ports, which can be uplinked to the backbone switch and monitoring center over long distances. The distance can be extended over 550 meters or more (according to the performance of the SFP module). They are well-suited for applications within enterprise data centers and distributions.
● 4 Working Modes
The switches support 4 working modes (Default, QoS, CCTV, VLAN)
Default
All ports could be able to communicate with each other. In this mode, the switch can function as the core switch in small-scale networking.
QoS
In this mode, ports 1-8 are high-priority ports. When congestion occurs in the data forwarded by the switch, the data on the high-priority ports will be forwarded out first, thus guaranteeing stable transmission of video and data from the key locations without interruption or lag. Meanwhile, the SFP ports serve as the Uplink ports in this mode.
CCTV
The transmission distance of the specific RJ-45 ports (Ports 9-14 of UTP3318S-PSB250-M0, ports 17-22 of UTP3324S-PSB250-M0 & UTP3324S-PSB410-M0) is extended up to 250 meters with the limited rate of 10Mbps.
VLAN
The RJ-45 ports are isolated from each other but can communicate with the SFP ports. To a certain extent, it suppresses broadcast storms and improves network security.
● Excellent Performance of Protection and Anti-interference
Support 6kV surge protection to ensure stable operation.
+86-755-83898016-863
+86-1501-2669-765
info@utepo.net
Note: To speed up our service to you, please make sure the field with " * " mark is filled before you click on "Submit" button, Thank you!