If the distance between the two places is 500 meters, it has exceeded the maximum transmission range of the network cable, which is known as 100 meters, then how we can guarantee the network transmission? Usually, we often encounter long-distance transmission, so how to solve it?
At present, the direct and effective way are to use wireless CPE and Media Converter.
WIRELESS CPE
Preparation: A pair of wireless CPE, Pole
The outdoor wireless CPE, with dual-polarized directional antenna, can realize max 3km coverage range according to power.
In order to avoid wireless interference, the frequency band of most wireless CPE is 5G, with less interference, higher access rate, low delay and stable network speed, which can meet the transmission needs of video surveillance. The two CPEs are connected to the devices at both ends respectively to realize the transmission of network. The connection mode is shown in the following figure.
UTEPO Outdoor CPE List
MEDIA CONVERTER
Preparation: A pair of media converter, A fiber cable of over 500 meters.
The recommended texture of fiber cable is leather, which adapts to field environment well and realizes the long-distance transmission of network, while the price is much cheaper than twisted pair. You can also save the cost by using cold joint instead of the welding.
It forms the networking and transmit the data via fiber cable by connecting media converters to network device and surveillance device.
Click here to get the Media Converters Application Tips
+86-755-83898016-863
+86-1501-2669-765
info@utepo.net
Note: To speed up our service to you, please make sure the field with " * " mark is filled before you click on "Submit" button, Thank you!