--- BACKGROUND ---
In traditional elevator surveillance, the video cable is mixed with the travelling electric cable, and it will be output from elevator equipment room and then connected with control center. The system structure is simple but elevator shaft is a more complicated environment, so there are several important problems for traditional elevator surveillance.
a. Video Signal Interference
b. construction difficulty, high costs
c. Lower video image quality
In order to solve the problem of elevator monitoring signal interference, difficulty in construction, high cost and low quality of video image, UTEPO introduced Elevator IP surveillance solution-the Ethernet extender device of UTP7301EOC-A1.
--- SOLUTIONS ---
Connect the IP cameras with UTEPO extender UTP7301EOC-IPC-A1 terminal, and link to the extender UTP7301EOC-SV-A1 terminal via coaxial cable and other cables. Then connect to Ethernet switch, which would be a complete solution.
--- ADVANTAGES ---
a. Saving costs, shorten the project cycle
b. Support different Cable, Good Compatibility
c. Up to 1.2KM super long transmission distance
d. Excellent Anti-interference ability
--- RECOMMENDED PRODUCTS ---
Transmission up to 1200m via coaxial, 700m via CAT
6KV surge immunity, 8KV ESD protection, superior anti-interference
+86-755-83898016-863
+86-1501-2669-765
info@utepo.net
Note: To speed up our service to you, please make sure the field with " * " mark is filled before you click on "Submit" button, Thank you!
PoE Switch and Industrial switch Manufacturer
