|
|
|
|
UTP7308GE-BTPOE90 provides 8 Gigabit Ethernet RJ-45 ports and 2 Gigabit SFP uplink ports. The switch meets IEEE 802.3af/at/bt standard, and each RJ-45 port of the switch could provide 90W power max to the PD, with total PoE power budgets up to 720W, which get rid of the limits the power available for smart networks and devices. With abundant L2 management, the switch applies widely in the lighting industry, security monitoring, enterprise parks, etc.
|
|
|
|
|
Key Features
|
|
|
● Rich Port & User-friendly Panel for A Better Experience
|
|
Providing 8*10/100/1000Base-T PoE++ RJ-45 ports + 2*1000 Base-X SFP ports + 1*RS-232 console port (115200,8,N,1). You can also know the operating status clearly through the LED on the front panel, and reset the device without any re-installation.
|
|
|
|
|
|
|
|
|
● Wide Application
|
Supply power and data to network devices that need high power to work normally, such as smart lighting, all-in-one PC, AI high-speed camera, industrial sensor etc.
|
|
|
|
|
|
|
|
● Smart O & M Experience,
|
● Less Maintenance
|
You can enjoy a smart O & M experience with UTEPO featured technologies (one-key smart, PoE watchdog, etc.)
|
|
|
|
● Abundant L2 Management
|
● Function
|
Support 802.1Q VLAN, 802.1P QoS, SNMP, PoE Management, IPv6, etc.
|
|
|
|
|
● Perpetual PoE
|
The Perpetual POE provides uninterrupted power to connected PD device (PoE Camera, etc) even when the PoE switch is booting.
|
|
|
|
● High Reliability
|
Support 6kV surge protection and 8kV ESD protection.
|
|
|
|
|
|
|
|
|
Application
|
|
|
|
Specification
|
|
|
|
|
|
● 8*GE PoE + 2*GF
|
● IEEE802.3 af/at/bt
|
● Max output PoE: 90W (All Ports)
|
● Total PoE Budget: 720W
|
● L2 Management (DHCP, Fast-Ring, PoE management, IPv6, etc.)
|
● Support PoE Watchdog & Perpetual PoE
|
● Support Relay Alarm
|
● Fanless Design
|
|
|
|
|
|
|
|
|
|
|